50-160mm PPR water pipe extrusion line
50-250mm HDPE tube production line / making machine
Diameter Range (mm): 50 75 90 110 160 wall thickness by request
Main Extruder Motor Power: 90kw
Line Space Occupation: 36mx4mx3m
Capacity: 180-280kg/h
Introduction of PPR pipe production line
The unit consists of single screw extruder
, die head, vacuum cooling tank,
haul-off machine, planetary(swarf less/ chip free cutter / no dust
cutter) cutting machine, winder stacker and so on.
Turn-key solution can be provided, like
laser printer ,crusher, shredder, water chiller, air compressor etc. to achieve
high-grade and automatic tube production.
Characteristics of PPR 50-160mm Pipe extrusion line cost
-
This machine is mainly used for pipe production with PE resin as raw material.
-
The design of slotted feeder barrel and barrier screw can improve the plasticizing effect.
-
High extrusion rate, low melt temperature and uniform temperature.
-
Barrier type two pole mixing, i.e. special screw for day, slotting barrel.
-
Equipped with a new type of secondary split die, with the characteristics of low temperature and low pressure extrusion: water film sizing sleeve, to ensure the high-speed production of pipes.
-
The marking line can be selected to extrude to produce the pipe with color mark.
-
The production line can produce PPR pipe by changing mould.
Process Flow for PPR 50-160mm pipe making machine :
Raw material+ master batches → Mixing → vacuum feeding → material dryness → single screw extruder →color string extruder → spiral mould → vacuum calibration tank → spray cooling water tank →spray-code printer → haul-off → no-dust cutter → Double disc
Winding/ Stacker → finished product
inspecting &packing
More images for 50-160mm PPR pipe production line
Single screw extruder
Model :SJ75/33 extruder of PPR 750-160MM extrusion line
-
Barrel and screw material: 38CrMoAlA,
-
Diameter of screw: Φ 75mm
-
Length diameter ratio of screw: 33:1
-
Driving motor power: 90kW high speed screw
-
Temperature control table of OMRON
-
ABB or Siemens brand inverter
-
Schneider or Siemens AC contactor
-
Siemens Bede motor
-
Gearbox: high torque, low noise, hard tooth surface grinding reducer is equipped with external cooling circulation system
Die head and mould（including the bush,pin and
calibrator）
Materials: 40Cr Steel
Structure: Spiral or Basket
Single cavity design
Single layer design
Vacuum Calibration Tank
length: 9000mm
Tank materials: 4mm 304 S. S.Materials
Double-chamber structure vacuum and cooling
Water temperature and level controlling
technology
High pressure and stable water jet
Pressure protection design
Haul-Off machine :
ABB Frequency motor driving
Upper and lower caterpillar is driven
separately by the frequency inverter
Fast change type pads
High friction fact and anti-wear out
silicon rubber Pads
Metering counter
Cutter:
Non-dust cutter, Blade
rotates around pipe and cut off pipe with smooth surface.
Synchronous control
Cast aluminium fixture unit
High Quality Alloy Blades
Smooth Cutting surface
Servo motor Synchronous control
Stacker
Stainless steel 304 as touching material
Discharge driving by air cylinder
Packaging of 50-160mm PPR pipe production line
Exhibition of 50-160mm PPR pipe production line
Contact Now
