500mm PE HDPE plastic pipe production line extrusion machine

$30000 - 100000 /Set/Sets

Min. Buyurtma:

1 Set/Sets

Endi murojaat qiling

 Hozir chat

Mahsulot tavsifi

Mahsulot xususiyatlari
Paket va etkazib berish

< >

Overview

Mahsulot xususiyatlari

Dastur: Pipe

Processing Plastic Type: Pp, Pe, Hdpe, Ppr, Hdpe/Pp, Pe/Pp, Ldpe, Lldpe

Holat: New

Place Of Origin: China

Warranty Period: 1 Year

Paket va etkazib berish

Sotish birliklari:: Set/Sets

500mm PE HDPE plastic pipe production line extrusion machine

500mm PE HDPE plastic pipe production line extrusion machine is a new product developed by our company by introducing and absorbing foreign advanced technology. Its screw, die and other key components are specially designed according to the characteristics of pp-r. Through the three-layer co-extrusion technology, the spiral three-layer co extrusion die with special design is adopted to ensure the uniform thickness of three layers and the thickness of each layer can be adjusted arbitrarily. Spiral split die can be equipped with static mixing system. The material layers are fully overlapped with each other. Compared with the traditional support die head, the internal pressure is more uniform. In the form of ABA, the glass fiber in the middle reinforcement layer is arranged regularly, and organically melts with the inner and outer PPR layers to form a whole, which significantly overcomes the overhanging phenomenon of the pure PPR pipe in surface installation, and reduces the linear expansion coefficient of the pipe.

Characteristics of PE HDPE plastic pipe production line extrusion machine

1. This machine is mainly used for pipe production with PPR resin as raw material. 2. The design of slotted feeder barrel and barrier screw can improve the plasticizing effect. 3. High extrusion rate, low melt temperature and uniform temperature. 4. Barrier type two pole mixing, i.e. special screw for day, slotting barrel. 5. Equipped with a new type of secondary split die, with the characteristics of low temperature and low pressure extrusion: water film sizing sleeve, to ensure the high-speed production of pipes. 6. The production line is controlled by PLC, and PPR cold and hot water pipe production line manufacturer has good man-machine interface. 7. The marking line can be selected to extrude to produce the pipe with color mark. The production line can produce PE pipe by changing mould. 8. Random polypropylene production line is mainly used to produce pipe production line with PP-R resin as raw material, and also suitable for pipe production with PP, Pb and PE resin as raw materials.

Mg 2259