630-1200mm HDPE water pipe extrusion line
630-1200mm HDPE tube production line / making machine
Diameter Range (mm): 630 710 800 900 1000 1200 wall thickness by request
Main Extruder Motor Power: 355kw
Line Space Occupation: 65mx5mx3m
Capacity: 1200-1500kg/h
Introduction of HDPE 630-1200mm big size pipe production line
The unit consists of single screw extruder
, die head, vacuum cooling tank,
haul-off machine, planetary(swarf less/ chip free cutter / no dust
cutter) cutting machine, winder stacker and so on.
Turn-key solution can be provided, like
laser printer ,crusher, shredder, water chiller, air compressor etc. to achieve
high-grade and automatic tube production.
Characteristics of PE 630-1200mm Pipe extrusion line cost
-
This machine is mainly used for pipe production with PE resin as raw material.
-
The design of slotted feeder barrel and barrier screw can improve the plasticizing effect.
-
High extrusion rate, low melt temperature and uniform temperature.
-
Barrier type two pole mixing, i.e. special screw for day, slotting barrel.
-
Equipped with a new type of secondary split die, with the characteristics of low temperature and low pressure extrusion: water film sizing sleeve, to ensure the high-speed production of pipes.
-
The marking line can be selected to extrude to produce the pipe with color mark.
Process Flow for PE 630-1200mm pipe making machine :
Raw material+ master batches → Mixing → vacuum feeding → material dryness → single screw extruder →color string extruder → spiral mould → vacuum calibration tank → spray cooling water tank →spray-code printer → haul-off → no-dust cutter → Double disc
Winding/ Stacker → finished product
inspecting &packing
More images for PE 630-1200mm pipe production line
Single screw extruder
Model :SJ120/38 extruder of HDPE 630-1200MM extrusion line
-
Barrel and screw material: 38CrMoAlA,
-
Diameter of screw: Φ 120mm
-
Length diameter ratio of screw: 38:1
-
Driving motor power: 355kW high speed screw
-
Temperature control table of OMRON
-
ABB or Siemens brand inverter
-
Schneider or Siemens AC contactor
-
Siemens Bede motor
-
Gearbox: high torque, low noise, hard tooth surface grinding reducer is equipped with external cooling circulation system
Die head and mould（including the bush,pin and
calibrator）
Materials: 40Cr Steel
Structure: Spiral or Basket
Single cavity design
Single layer design
Vacuum Calibration Tank
length: 1000mm
Tank materials: 4mm 304 S. S.Materials
Double-chamber structure vacuum and cooling
Water temperature and level controlling
technology
High pressure and stable water jet
Pressure protection design
12 caterpillar Haul-Off machine :
ABB Frequency motor driving
Upper and lower caterpillar is driven
separately by the frequency inverter
Fast change type pads
High friction fact and anti-wear out
silicon rubber Pads
Metering counter
Cutter:
Non-dust cutter, Blade
rotates around pipe and cut off pipe with smooth surface.
Synchronous control
Cast aluminium fixture unit
High Quality Alloy Blades
Smooth Cutting surface
Servo motor Synchronous control
Stacker
Stainless steel 304 as touching material
Discharge driving by air cylinder
Packaging of PE 630-1200mm pipe production line
Exhibition of PE 630-1200mm pipe production line
Contact Now
